Dongguan Qilong Electronic Co., Ltd.
Model No.: AD-101
Function: Holder Only
Compatible Brand: IPhone All Phones
Installation: Sucker The Back Of The Phone
Place of Origin: Made in China
Supply Ability: 50000
Our product has two functions of speaker and mobile phone holder, and use BK Bluetooth module for wireless Bluetooth connection. Using 40mm high-quality speaker unit, speaker electrical parameters of 4Ohm, 3w, matching 40mm resonant membrane composed of sound chamber system. Using four small sucker to the phone or IPAD Mini adsorption in the holder sound, moderate suction easy to pick and place.
According to different viewing habits,Bluetooth Speaker Support Wireless Bass Stereo Mini Speaker has 42 ° and 32 ° two angle for the phone choice.Products package with environmentally friendly soft, on the one hand can protect the phone and the IPAD Mini surface is not scratched, on the other hand easy to carry. This product is rechargeable lithium battery-powered, battery capacity of 400mAh. With a common USB (5 +/- 0.5V) data cable can be charged, charging 2 to 3 hours can be filled, a full charge, the product in the normal volume can continue to play 3 to 5 hours. Designed with a 3.5mm standard audio jack, you can work with a 3.5mm standard audio cable connected to a music player such as a cell phone.
A 3.7VDC, 400mAh polymer lithium battery.
push the switch button to the power side, blue light, then enter the working state..
with the standard 3.5mm audio cable to connect the phone or music player, adjust the appropriate volume for music playback, this time the blue light to keep bright.
Connect the standard USB charging cable to the computer or the voltage of 5 ± 0.5V adapter, the other end of the MICRO USB product into the Micro USB port, charging indicator shows red, into the charging state.
4.Play time (hours)
When the charge is full, the player volume can be played in the 80% state to play 3 to 5 hours.
The suction surface of the mobile phone requires a smooth (unclean mobile phone plane will affect the adsorption force).
Put the phone evenly placed in the middle of the four sucker position,pressed to ensure that the back of the phone and suction sucker full, so that the adsorption effect is better to maintain a long time.
6.Sucker suction duration (hours)
≥ 8 hours (mobile phone adsorption surface smooth and clean)
7.The total suction force of the suction cup
The bracket has a choice of 42 ° and 32 °
L74x W54x H63mm
About 132g (with battery)
1. Remove the product, push the switch to the side of the power supply symbol, the blue light on the other side of the product flashes, and issue a heavy ding sound. At this time into the Bluetooth match state. Use the phone, IPAD, computer and other equipment with Bluetooth function settings function options to find the product of the code number AD101, and then select the Bluetooth match or connection, when the Bluetooth match connected sound will be issued a long sound and crisp Boom sound, then means the success of Bluetooth match, blue light long bright. The blue light blinks during music playback.
2. Can also be directly with the standard 3.5mm audio cable to the audio and mobile phones, IPAD, computer and other music players connected to play music.
3. The phone can be directly adsorbed in the audio bracket on the suction cup, easy to enjoy the video. The bracket has a choice of 42 ° and 32 °.
4. At this time you can play music, through the phone, IPAD, computer and other music players to adjust the volume of music.
5. In the playback process to select, adjust the music can only play through the phone, IPAD, computer and other music players to do the control operation.
6. When the sound playback to the battery voltage at 2.8V DC, the sound beep beep sound, the voltage is lower than 2.8V DC when the blue light will go out, the sound can not work, then need to charge.
7. Connect the standard USB charging cable to the computer or the voltage of 5 ± 0.5V adapter, the other end MICRO USB into the product Micro USB jack, charging indicator light red and long, into the charging state. Continuous charging 2 to 3 hours the product can be filled, full of red light automatically extinguished.
Test the relevant requirements
|Visual inspection||The appearance of visual according to our factory "process standards" plastic testing level II, printing and packaging materials to check the specifications, batch number and other content, check the system, printing / painting / plating good, adhesion to be tested||Visual and operation.|
|Battery low voltage indication||When the sound playback to the battery voltage is lower than 2.8V DC blue light is off, the sound can not work, then need to charge the speaker||The blue light is off and the sound does not work|
|The product falls test||Place a 30mm thick board on a smooth concrete floor with the bottom of the finished product equal to the floor and fall from 100cm.||The machine is working properly.|
|product drop test||In the smooth concrete floor, the goods from the height of 70cm, the box by 1 angle 3 edge 6 surface position.||product appearance and function is normal.|
|High and low temperature cycle test||The product was placed in an environment at a temperature of -20 ± 2 ° C and a humidity of 85% ± 2% RH for 2 hours and then placed at a temperature of -20 ± 2 ° C. After repeating the above 9 times, the machine was allowed to stand at room temperature for 2 hours.||functions and appearance of normal.|
|High temperature placement test||The machine was placed in an environment at a temperature of 60 ± 2 ° C and a humidity of 65% ± 2% RH for 48 hours and then at room temperature for 2 hours||functions and appearance of normal.|
|Low temperature placement test||The product was placed at -20 ± 2 ° C for 48 hours and then left at room temperature for 2 hours.||functions and appearance of normal.|
|Moisture resistance test||The product was placed in an environment of a temperature of 40 ± 3 ° C and a humidity of 90% ± 2% RH for 48 hours and then at room temperature for 2 hours.||functions and appearance of normal.|
|High temperature work test||The product was placed in an environment at a temperature of 40 ° C for 2 hours and the relevant function was tested in this environment.||functions and appearance of normal.|
|Low temperature work test||The product was placed in an environment with a temperature of 0 ° C for 2 hours and the relevant function was tested in that environment.||functions and appearance of normal.|
Product Categories : Bluetooth Speakers and Stand